1 2 3 6 5 4 1 2 3 6 5 4 low on-resistance. controls load voltage 40v to 400v. dc load type is available. mm inch 8.8 .346 6.4 .252 3.9 .154 8.8 .346 6.4 .252 3.6 .142 features 1. controls low-level analog signals photomos relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 2. control with low-level input signals 3. controls various types of loads such as relays, motors, lamps and solenoids. 4. optical coupling for extremely high isolation unlike mechanical relays, the photomos relay combines led and optoelectronic device to transfer signals using light for extremely high isolation. 5. eliminates the need for a counter electromotive force protection diode in the drive circuits on the input side 6. stable on resistance 7. low-level off state leakage current 8. eliminates the need for a power supply to drive the power mosfet a power supply used to drive the power mosfet is unnecessary because of the built-in optoelectronic device. this results in easy circuit design and small pc board area. 9. low thermal electromotive force (approx. 1 v) typical applications ?high-speed inspection machines ?telephone equipment ?data communication equipment ?computer types 1. dc type (aqv10 types) *indicate the peak ac and dc values. note: for space reasons, the package type indicator ? and ? are omitted from the seal. output rating* part no. packing quantity through hole terminal surface-mount terminal load voltage load current tube packing style tape and reel packing style tube tape and reel picked from the 1/2/3-pin side picked from the 4/5/6-pin side 40 v 700 ma aqv101 aqv101a aqv101ax aqv101az 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs 60 v 600 ma aqv102 aqv102a aqv102ax aqv102az 250 v 300 ma aqv103 aqv103a aqv103ax aqv103az 400 v 180 ma aqv104 aqv104a aqv104ax aqv104az 2. ac/dc type (aqv20 types) *indicate the peak ac and dc values. note: for space reasons, the smd terminal shape indicator ? and the package type indicator ? and ? are omitted from the seal. output rating* part no. packing quantity through hole terminal surface-mount terminal load voltage load current tube packing style tape and reel packing style tube tape and reel picked from the 1/2/3-pin side picked from the 4/5/6-pin side 40 v 500 ma aqv201 aqv201a aqv201ax aqv201az 1 tube contains 50 pcs. 1 batch contains 500 pcs. 1,000 pcs 60 v 400 ma aqv202 aqv202a AQV202AX aqv202az 250 v 200 ma aqv203 aqv203a aqv203ax aqv203az 400 v 150 ma aqv204 aqv204a aqv204ax aqv204az hf photomos (aqv10 ? , 20 ? ) (aqv10 series) (aqv20 series) all rights rese r v ed ?c opyright matsushita elect r ic w o r k s , ltd.
hf photomos (aqv10 ? , 20 ? ) rating 1. dc type (aqv10 types) 1) absolute maximum ratings (ambient temperature: 25 c 77 f ) 2) electrical characteristics (ambient temperature: 25 c 77 f ) note: recommendable led forward current i f = 10 ma. *turn on/turn off time item symbol aqv101(a) aqv102(a) aqv103(a) aqv104(a) remarks input led forward current i f 50 ma led reverse voltage v r 10 v peak forward current i fp 1 a f = 100 hz, duty factor = 0.1% power dissipation p in 150 mw output load voltage (dc) v l 40 v 60 v 250 v 400 v continuous load current (dc) i l 0.7 a 0.6 a 0.3 a 0.18 a peak load current i peak 1.8 a 1.5 a 0.6 a 0.5 a 100 ms (1 shot) power dissipation p out 360 mw total power dissipation p t 410 mw i/o isolation voltage v iso 1,500 v (ac) temperature limits operating t opr ?0 c to +85 c ?0 f to +185 f non-condensing at low temperatures storage t stg ?0 c to +100 c ?0 f to +212 f item symbol aqv101(a) aqv102(a) aqv103(a) aqv104(a) condition input led operate current typical i fon 2.3 ma i l = max. maximum 5 ma led turn off current minimum i foff 0.8 ma i l = max. typical 2.2 ma led dropout voltage typical v f 2.3 v i f = 10 ma maximum 3 v output on resistance typical r on 0.3 ? 0.37 ? 2.7 ? 6.3 ? i f = 10 ma i l = max. within 1 s on time maximum 0.5 ? 0.7 ? 4 ? 8 ? off state leakage current maximum 1 a i f = 0 ma, v l = max. transfer characteristics switching speed turn on time* typical t on 0.23 ms 0.22 ms 0.13 ms 0.09 ms i f = 10 ma i l = max. maximum 1 ms turn off time* typical t off 0.07 ms 0.08 ms i f = 10 ma i l = max. maximum 1 ms i/o capacitance typical c iso 1.3 pf f = 1 mhz v b = 0 v maximum 3 pf initial i/o isolation resistance minimum r iso 1,000 m ? 500 v dc ton input output 10% 90% toff all rights rese r v ed ? c opyright matsushita elect r ic w o r k s , ltd.
hf photomos (aqv10 ? , 20 ? ) 2. ac/dc type (aqv20 types) 1) absolute maximum ratings (ambient temperature: 25 c 77 f ) 2) electrical characteristics (ambient temperature: 25 c 77 f ) note: recommendable led forward current i f = 10 ma. *turn on/turn off time item symbol type of connec- tion aqv201(a) aqv202(a) aqv203(a) aqv204(a) remarks input led forward current i f 50 ma led reverse voltage v r 10 v peak forward current i fp 1 a f = 100 hz, duty factor = 0.1% power dissipation p in 150 mw output load voltage (peak ac) v l 40 v 60 v 250 v 400 v continuous load current i l a 0.5 a 0.4 a 0.2 a 0.15 a a connection: peak ac, dc b, c connection: dc b 0.7 a 0.6 a 0.3 a 0.18 a c 1.0 a 0.8 a 0.4 a 0.25 a peak load current i peak 1.8 a 1.5 a 0.6 a 0.5 a a connection 100 ms (1 shot) v l = dc power dissipation p out 360 mw total power dissipation p t 410 mw i/o isolation voltage v iso 1,500 v ac temperature limits operating t opr 40 c to +85 c 40 f to +185 f non-condensing at low temperature storage t stg 40 c to +100 c 40 f to +212 f item symbol type of connec- tion aqv201(a) aqv202(a) aqv203(a) aqv204(a) remarks input led operate current typical i fon 2.4 ma i l = max. maximum 5 ma led turn off current minimum i foff 0.8 ma i l = max. typical 2.2 ma led dropout voltage typical v f 2.3 v i f = 10 ma maximum 3 v output on resistance typical r on a 0.6 ? 0.74 ? 5.5 ? 12.4 ? i f = 10 ma i l = max. within 1 s on time maximum 1 ? 1.4 ? 8 ? 16 ? typical r on b 0.3 ? 0.37 ? 2.7 ? 6.2 ? i f = 10 ma i l = max. within 1 s on time maximum 0.5 ? 0.7 ? 4 ? 8 ? typical r on c 0.15 ? 0.18 ? 1.4 ? 3.1 ? i f = 10 ma i l = max. within 1 s on time maximum 0.25 ? 0.35 ? 2 ? 4 ? off state leakage current maximum 1 a i f = 0 ma, v l = max. transfer characteristics switching speed turn on time* typical t on 0.38 ms 0.41 ms 0.21 ms 0.18 ms i f = 10 ma i l = max. maximum 1 ms turn off time* typical t off 0.08 ms 0.07 ms i f = 10 ma i l = max. maximum 1 ms i/o capacitance typical c iso 1.3 pf f = 1 mhz v b = 0 v maximum 3 pf initial i/o isolation resistance minimum r iso 1,000 m ? 500 v dc ton input output 10% 90% toff opyright matsushita elect r ic w o r k s , ltd.
hf photomos (aqv10 , 20 ) reference data 1.-(1) load current vs. ambient temperature characteristics (dc type) allowable ambient temperature: e 40 c to +85 c e 40 f to +185 f 1.-(2) load current vs. ambient temperature characteristics (ac/dc type) allowable ambient temperature: e 40 c to +85 c e 40 f to +185 f type of connection: a 2.-(1) on resistance vs. ambient temperature characteristics (dc type: aqv101, aqv102) led current: 10 ma; continuous load current: max. (dc) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 e 40 20 40 60 8085 100 e 20 aqv102(a) aqv101(a) aqv103(a) aqv104(a) ambient temperature, c load current, a 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 e 40 20 40 60 8085100 e 20 aqv202(a) aqv201(a) aqv203(a) aqv204(a) ambient temperature, c load current, a 1.0 0.8 0.6 0.4 0.2 0 0 e 40 20 40 60 8085 e 20 aqv102 aqv101 ambient temperature, c on resistance, 2.-(2) on resistance vs. ambient temperature characteristics (dc type: aqv103, aqv104) led current: 10 ma; continuous load current: max. (dc) 2.-(3) on resistance vs. ambient temperature characteristics (ac/dc type: aqv201, aqv202) measured portion: between terminals 4 and 6; led current: 10 ma; continuous load current: max. (dc) 2.-(4) on resistance vs. ambient temperature characteristics (ac/dc type: aqv203, aqv204) measured portion: between terminals 4 and 6; led current: 10 ma; continuous load current: max. (dc) 10 8 6 4 2 0 0 e 40 20 40 60 8085 e 20 aqv104 aqv103 ambient temperature, c on resistance, 2.0 1.6 1.2 0.8 0.4 0.2 0.6 1.0 1.4 1.8 0 0 e 40 20 40 60 8085 e 20 aqv202 aqv201 ambient temperature, c on resistance, 20 16 12 8 4 2 6 10 14 18 0 0 e 40 20 40 60 8085 e 20 aqv204 aqv203 ambient temperature, c on resistance, 3.-(1) turn on time vs. ambient temperature characteristics (dc type) led current: 10 ma; load voltage: max. (dc); continuous load current: max. (dc) 3.-(2) turn on time vs. ambient temperature characteristics (ac/dc type) led current: 10 ma; load voltage: max. (dc); continuous load current: max. (dc) 4.-(1) turn off time vs. ambient temperature characteristics (dc type) led current: 10 ma; load voltage: max. (dc); continuous load current: max. (dc) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 e 40 20 40 60 8085 e 20 aqv102 aqv101 aqv103 aqv104 ambient temperature, c turn on time, ms 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 e 40 20 40 60 8085 e 20 aqv202 aqv201 aqv203 aqv204 turn on time, ms ambient temperature, c 0.4 0.3 0.2 0.1 0 0 e 40 20 40 60 8085 e 20 aqv103 aqv101,aqv102 aqv104 ambient temperature, c turn off time, ms 4.-(2) turn off time vs. ambient temperature characteristics (ac/dc type) led current: 10 ma; load voltage: max. (dc); continuous load current: max. (dc) 5.-(1) led operate/turn off current vs. ambient temperature characteristics (dc type) load voltage: max. (dc); continuous load current: max. (dc) 5.-(2) led operate/turn off current vs. ambient temperature characteristics (ac/dc type) load voltage: max. (dc); continuous load current: max. (dc) 0.4 0.3 0.2 0.1 0 0 e 40 20 40 60 8085 e 20 aqv203 aqv201, aqv202 aqv204 ambient temperature, c turn off time, ms 5 4 3 2 1 0 0 e 40 20 40 60 80 85 e 20 aqv103 aqv101 aqv102 ambient temperature, c led operate/turn off current, ma aqv104 5 4 3 2 1 0 0 e 40 20 40 60 8085 e 20 aqv203 aqv202 aqv201 ambient temperature, c led operate/turn off current, ma aqv204 all rights rese r v ed ? c o p y r i gh t matsushita elect r ic w o r k s , ltd.
hf photomos (aqv10 , 20 ) 6. led dropout voltage vs. ambient temperature characteristics sample: aqv202 led current: 10 to 50 ma 7.-(1) current vs. voltage characteristics of output at mos portion (dc type) ambient temperature: 25 c 77 f 7.-(2) current vs. voltage characteristics of output at mos portion (ac/dc type) measured portion: between terminals 4 and 6; ambient temperature: 25 c 77 f 3.0 2.5 2.0 0 e 20 20 40 60 8085100 e 40 50ma 40ma 30ma 20ma 10ma ambient temperature, c led dropout voltage, v 0.7 0.6 0.5 0.4 0.3 0.2 0.1 voltage, v current, a e 0.7 e 0.1 e 0.2 e 0.3 e 0.4 e 0.5 e 0.6 0.2 0.4 0.6 0.8 1.0 e 0.8 e 0.6 e 0.4 e 0.2 e 1.0 aqv101 aqv102 aqv103 aqv104 e 1.6 e 1.2 e 0.8 e 0.2 e 0.3 e 0.4 e 0.5 e 0.6 0.6 0.5 0.4 0.3 0.2 0.1 0.4 0.8 1.2 1.6 1.8 2.0 aqv201 aqv202 aqv203 aqv204 e 0.4 current, ma voltage, v e 0.1 e 1.8 e 2.0 8. off state leakage current vs. load voltage characteristics sample: aqv204; measured portion: between terminals 4 and 6; ambient temperature: 25 c 77 f 9.-(1) turn on time vs. led forward current characteristics (dc type) load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 9.-(2) turn on time vs. led forward current characteristics (ac/dc type) measured portion: between terminals 4 and 6; load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 10 e 3 10 e 6 10 e 9 10 e 12 0 2 0 4 0 6 0 8 0 100 load voltage, v off state leakage current, a 0.6 0.5 0.4 0.3 0.2 0.1 0 10 20 30 40 50 aqv102 aqv101 aqv103 aqv104 led forward current, ma turn on time, ms 1.0 0.8 0.6 0.4 0.2 0 10 20 30 40 50 aqv202 aqv201 aqv203 aqv204 led forward current, ma turn on time, ms 10.-(1) turn off time vs. led forward current characteristics (dc type) load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 10.-(2) turn off time vs. led forward current characteristics (ac/dc type) measured portion: between terminals 4 and 6; load voltage: max. (dc); continuous load current: max. (dc); ambient temperature: 25 c 77 f 11.-(1) output capacitance vs. applied voltage characteristics (dc type) frequency: 1 mhz; ambient temperature: 25 c 77 f 0.16 0.12 0.08 0.04 0 10 20 30 40 50 aqv103 aqv101 aqv102 led forward current, ma turn on time, ms aqv104 0.16 0.12 0.08 0.04 0 10 20 30 40 50 aqv204 aqv201 aqv202 aqv203 led forward current, ma turn on time, ms 700 600 500 400 300 200 100 0 10 20 30 40 50 aqv101,102 aqv103,104 applied voltage, v output capacitance, pf 11.-(2) output capacitance vs. applied voltage characteristics (ac/dc type) measured portion: between terminals 4 and 6; frequency: 1 mhz; ambient temperature: 25 c 77 f 700 600 500 400 300 200 100 0 10 20 30 40 50 aqv201,202 aqv203,204 applied voltage, v output capacitance, pf all rights rese r v ed ? c o p y r i gh t matsushita elect r ic w o r k s , ltd.
|
